DIY Pennant Flag Puns

Everyone is super excited about the Super Bowl, and I’m like cool... an excuse to have a party and eat! I’ve never really been into sports (or good at them...) so I figured for Super Bowl, I’ll just do what I do best... crafting! Since I don’t even know who’s playing, I figured I’d keep it nice and generic with some colorful, silly pennant flags that you can use for pretty much any football game in the future. And since I’m ridiculous, they’re full of funny sayings. That’s right- you can make some PUN-nant flags for your home! (see what I did there?!)

You will need:

Felt (similar here)
Cricut (here)
White iron-on vinyl (here)
Printer (I have this one and love it!)
Pennant template (here)
Cricut Template (here)
Iron (here)
Felt Scraps
Brown acrylic paint (here)
Glue gun
Cricut supplies & fabric scissors (here and here)
Felt football stickers (similar here)

Directions

1. Cut out your vinyl on the cricut and get it ready for ironing. To learn more about using Cricut iron-on vinyl (with full instructions!) check out this post.
2. Using your template, cut your pennant flags out of felt. If you position them efficiently, you can get at least 2 flags out of 1 piece of felt. 
3. Iron your quotes onto the pennant flags. Let cool fully before peeling. See this post for more info.
4. Create your felt embellishments as per the instructions below.
5. Glue your embellishments onto the pennant flag using a glue gun.

For the finger:

Cut a hand and finger shape out of pink felt. If you’re not sure of the shape, use a photo from online and trace it as a template onto the felt. Add a perimeter with white paint, then paint little triangles below the perimeter for knuckles. Once your paint has dried, iron the #1 onto the foam finger, then glue onto your flag. 

For the cookie:

Cut a squiggly oval out of tan felt. Using brown paint, add small dots for chocolate chips. My paint was named Melted Chocolate- how perfect! Let dry, then glue onto the flag. 

For the beer cup:

Cut the shapes out of felt- a cup with handle, an oval with a flat top for the beer, a smaller oval with a flat top for the accent color, and white foam. I also cut an additional cup handle for more depth, which was basically a C-shape. Fold the cup in half, then cut the middle out of the handle. Trim as needed. Glue the felt pieces together and then glue your cup onto your flag. 

So what do you do with these now? Add a ribbon and hang them up! Or, add a stick and let your pun-nant flag fly! Or, uh... wave? What great football puns did I miss? Let me know in the comments below!

Easy Football Party Crafts

Is it football season yet? I only know the fall for pumpkin picking, apple cider everything, and the ability to totally switch up my wardrobe. However, I know there's a whoooole bunch of people that love it for football! My fiancé is one of those people, so once in a while we hang out with the gang and watch a football game. He's a "less is more" type of guy, and I'm a "what else can we add?" type of gal, so I came up with a happy medium. 

I whipped up these easy crafts for Mariah at Giggles Galore. They're quick to make, and feature craft supplies you probably have at home. They're perfect for a mini football party. This month, I did not one, but TWO blog posts for her! You can find them here and here.

So be sure to head over to Giggles Galore now to see how to make these Easy Football Party Crafts and Football Flag Stirrers and Cups.

DIY Mean Girls Conversation Hearts Banner (and how to use Cricut Iron On Vinyl!)

There are some movies that you watch once and enjoy, but never really have the desire to see again. Then, there are those movies that you watch over and over again until you've memorized practically every word. Mean Girls is one of those movies. If you can't recite at least one of those memorable quotes, then you can't sit with us! It's got Lindsay Lohan at the peak of her career, Tina Fey's comedy, Rachel McAdams & Amanda Seyfriend before they were super famous, and Lacey Chabert from everyone's favorite show, Party of Five (people liked that show, right? I never watched it...). Combine that with the awesome 2004 fashion sense, the catchy lines, the harsh reality of frenemies, and the fact that you always wanted to be popular, and you've pretty much got the makings of a FANTASTIC movie. It was basically made by girls, for girls, so there's no way it wouldn't succeed. PS, can we talk about how everyone in Mean Girls wore lip gloss?! I'm not sure about you guys, but I don't wear lip gloss anymore. Is that just a high school thing? Idk...

With Valentine's Day coming up, I wanted to make something fun with some felt hearts I picked up at Target. They look to me like Conversation Hearts candy, which are usually boringly sweet. "U R CUTE"? "CALL ME"? C'mon.... But, what if they were sorta sassy instead? PERFECT OPPORTUNITY for a Mean Girls DIY. Just sayin'.

Go grab some popcorn, your Mean Girls DVD, and your glue gun. This is going to be Grool!

You will need:

Cricut Explore Air Machine (here)
Pastel felt hearts (from Target)
Iron (here)
Red iron-on transfer (here)
Cricut tool kit or Tweezers (here)
Ribbon
Glue gun

I know what you're thinking..."How do I use Cricut iron on vinyl?" I knew you'd ask, so I have just the tutorial for you. How did I know? I have a fifth sense... It's like I have ESPN or something. The iron on vinyl is actually pretty simple to use, as long as you know which way the vinyl goes and how to make sure your letters aren't backwards.

How to Use Cricut Iron-On Vinyl

1. Open the Mean Girls Conversation Hearts Candy document in Cricut Design Space. 

2. Take your red iron-on vinyl and place it on your cutting sheet, liner side down. You'll be cutting the vinyl (matte side), so that means the shiny side goes down.

3. Set up the file to cut on your Cricut machine by following the steps below. 

a. Set your Cricut machine mode to vinyl +

b. Press Go

c. Set to mirror image! This is very important, since your text needs to be backwards so that it'll be the right way when you finish.

c. Load your Cricut cutting mat and start cutting.

d. Wait for the Cricut machine to cut your file. Mine wouldn't cut the full document in one shot (annoying!) so after it stopped each time, I would remove the ones it cut from the document/cutting mat, reload the mat, and start cutting again.

Look at all those fabulous quotes just waiting to get out there into the world!

4. Once your document has finished cutting on the Cricut machine, carefully cut around each quote. It's best to cut as close as you can to the letters, and try to make the border around each side even. This will make it easier to center them on the conversation hearts.

5. Peel off the remaining vinyl, aka the extra red background. You'll be left with the clear liner and your letters. To do this, I take my Cricut hook tool and scrape a corner to make a hole.

Then, I carefully and slowly peel away the liner to reveal the letters beneath. I found that peeling the vinyl from left to right was easier, since most of the letters face that way. Otherwise, you're going against the grain. So, aka... not the way I'm doing it in the photos.

See how the E and the D in "Wednesday" are connected? That's because I'm peeling it the "wrong" way and it ripped the vinyl. It's not a big deal at all, because that's a scrap section anyway, but it makes it easier to peel if you go with the grain.

6. Once you've pulled away the excess Cricut vinyl, go back and remove the excess vinyl in the letter holes, or any that was left over. Flip it over and double check that everything is where it should be.

7. Center your quote on your conversation heart and press it down. To make sure it's evenly centered, I would look at a few things, like which word is in the center of the heart, how much distance is on either side, and how far it is from the top. If you're still not sure, take a quick picture with your phone to see if it's off center or crooked.

8. Use your iron to carefully iron your quote onto the heart. Use the wool/low setting and place a cloth over it so you don't scorch the felt. Then, flip your heart over and iron the underside. If you have a small craft iron, you may be able to do it without a cloth like I did.

9. Let it cool, then peel the liner off from the corner. Do this carefully to make sure all the letters fully adhered. If not, go back over it again, let it cool, and continue peeling.

Once all your quotes are ironed on, you can begin arranging your banner! See how I did that below.

Making your banner

1. Arrange your hearts in the order you'd like to see them, or by color.

2. Cut a small piece of ribbon. This will act as a "tape" to hold the hearts together.

3. Glue the ribbon onto the hearts at the widest part. Be sure to hold them as close together as you can to prevent a gap from forming between the hearts. I used pink ribbon, but a white one will probably camouflage the best. You can't really see it when you flip the banner over, so technically it doesn't matter.

I also recommend adding some extra ribbon or twine at the ends to hang it. I originally didn't want to do that, but taping felt on a wall is basically impossible.

Woohoo! Now, hang up your banner and revel in the joy of a Mean Girls Valentine's Day. You can also paste up some hearts as a party backdrop! This is my best Mean Girls face. Slightly friendly, slightly fierce, 100% Fetch. 

P.S. "And none for Gretchen Weiners. Bye!" is basically my favorite Mean Girls quote, and I use it in everyday life. It has so many practical uses.

So you agree? You think you're really pretty?

I really need to start wearing pink on Wednesdays. I mean, that's just like, the rules of feminism

So what's your favorite Mean Girls quote? Is it one I missed? Let me know in the comments below!

DIY Cotton Candy Garland

Ok guys, I have a confession to make. I'm a cotton candy addict. I loooove cotton candy. I know I shouldn't love it quite so much- it's pure sugar, and I'm a 27 year old woman. But something about that magical and fluffy cloud of candy tastes so good. Yes, I actually still eat it. Most people just admire it or decorate things with it, but I eat it. The only negative thing about cotton candy (besides the inevitable cavities) is the fact that the colored ones turn your mouth all kinds of colors. Then I get to walk around all day after a sporting event with blue lips, while people stare and my fiancé laughs at me. Oh well, c'est la vie. Luckily for you guys, this cotton candy won't turn your mouth any kinds of colors! Well, unless you try to eat it... I can't speak to that. With only a few steps, this garland is the cutest and easiest way to display your love for cotton candy. 

You will need:

Cotton Candy Picks (from Oriental Trading)
Ribbon (Mine was from Michael's on clearance)
Glue gun
Scissors (here)
 

1. Peel the sticks off the cotton candy picks. I recommend starting at the bottom tip of the cone, since it's the most delicate part. 

2. Cut off the tabs on the fluffy part of the cotton candy that keep it open. They're the teardrop shaped parts in the photo above.

3. Glue the honeycomb top open. Hold in place for a few seconds until the glue dries.

4. Once you've glued all your honeycombs open, grab your ribbon. Leave a few inches on the end so that you can hang it up. Then, glue the cotton candy evenly spaced out.

5. Hang it up and enjoy!

And there you have it! A quick and simple banner DIY that'll sweeten up any party. It would also make a really sweet addition to a little girl's room, your desk at work, basically anywhere you'd want to declare your love for cotton candy.

Do you still eat cotton candy, or do you have a different guilty snack you love? Let me know in the comments below!

DIY Colorful Leaf Garland

One of my favorite things about the fall is the leaves changing colors. For a few weeks, the world looks like a painting and it's so magical! Even though these colorful leaves can't be found on any natural tree (but can you imagine?!) I think they will add the perfect hint of color to your fall decor or Friendsgiving dinner. This tutorial features leaves from my fave party shop, Oriental Trading, and some Martha Stewart Paints. This garland is so easy to make that it's not even funny! If you've ever wanted to paint a tree but had no artistic talent, this project's for you! 

You will need:

Burlap Leaves from Oriental Trading
Twine
Hot Glue Gun
Neon Paints* 
*The colors I used were Hydrangea Purple, Beach Glass, Orange Soda, Yellowjacket, and Date Night Pink

Step 1: If your paints are brand new, remove the seal. Deduct points if you were accidentally slightly squeezing the bottle and spewed neon paint all over yourself, then dropped the seal on the carpet, paint-side down.....

2. Cover your workspace with scrap paper. The paint will seep through the holes in the burlap, so be sure you have it adequately covered!

3. Paint the leaves with complimentary colors so that the original color gets covered up. Let dry. Flip over and paint the other side. If the color of the leaf is still seeping through, paint a second coat.

4. Repeat for as many leaves as you would like and let them dry overnight.

5. Cut a length of ribbon or twine long enough for your leaves plus a little extra to hang it. Glue the leaves onto the twine, evenly spaced out, starting at the center.

6. Hang up and enjoy!

And that's all there is to it! I think this would be a super fun pre-Friendsgiving day activity. You can invite over your gals, have some moscato, and paint leaves into the night while watching a rom-com! Then everyone gets a fun parting gift they can hang up and remember you by. It's super affordable too!

So what do you think? Will you be inviting your besties over to create this colorful garland? What would you watch as you make it? Let me know in the comments below!